diff --git a/examples/ov5640_directio_kaluga1_3_ili9341.py b/examples/ov5640_directio_kaluga1_3_ili9341.py
index 110abad..e997e7c 100644
--- a/examples/ov5640_directio_kaluga1_3_ili9341.py
+++ b/examples/ov5640_directio_kaluga1_3_ili9341.py
@@ -19,9 +19,11 @@
 import struct
 
 import board
+import busdisplay
 import busio
 import digitalio
 import displayio
+import fourwire
 from adafruit_ticks import ticks_less, ticks_ms
 
 import adafruit_ov5640
@@ -36,7 +38,7 @@
 state.switch_to_output(True)
 
 spi = busio.SPI(MOSI=board.LCD_MOSI, clock=board.LCD_CLK)
-display_bus = displayio.FourWire(
+display_bus = fourwire.FourWire(
     spi,
     command=board.LCD_D_C,
     chip_select=board.LCD_CS,
@@ -69,7 +71,7 @@
     b"\x29\x80\x78"  # Display on then delay 0x78 (120ms)
 )
 
-display = displayio.Display(display_bus, _INIT_SEQUENCE, width=320, height=240)
+display = busdisplay.BusDisplay(display_bus, _INIT_SEQUENCE, width=320, height=240)
 
 bus = busio.I2C(scl=board.CAMERA_SIOC, sda=board.CAMERA_SIOD)
 cam = adafruit_ov5640.OV5640(
diff --git a/examples/ov5640_jpeg_kaluga1_3.py b/examples/ov5640_jpeg_kaluga1_3.py
index 6a7c4c9..6ad28fd 100644
--- a/examples/ov5640_jpeg_kaluga1_3.py
+++ b/examples/ov5640_jpeg_kaluga1_3.py
@@ -21,6 +21,7 @@
 import board
 import busio
 import displayio
+import fourwire
 import microcontroller
 
 import adafruit_ov5640
@@ -28,7 +29,7 @@
 # Release any resources currently in use for the displays
 displayio.release_displays()
 spi = busio.SPI(MOSI=board.LCD_MOSI, clock=board.LCD_CLK)
-display_bus = displayio.FourWire(
+display_bus = fourwire.FourWire(
     spi,
     command=board.LCD_D_C,
     chip_select=board.LCD_CS,
diff --git a/examples/ov5640_sdcard_kaluga_1_3.py b/examples/ov5640_sdcard_kaluga_1_3.py
index 664d5b7..55e79e0 100644
--- a/examples/ov5640_sdcard_kaluga_1_3.py
+++ b/examples/ov5640_sdcard_kaluga_1_3.py
@@ -28,6 +28,7 @@
 import board
 import busio
 import displayio
+import fourwire
 import neopixel
 import sdcardio
 import storage
@@ -37,7 +38,7 @@
 # Release any resources currently in use for the displays
 displayio.release_displays()
 spi = busio.SPI(MOSI=board.LCD_MOSI, clock=board.LCD_CLK)
-display_bus = displayio.FourWire(
+display_bus = fourwire.FourWire(
     spi,
     command=board.LCD_D_C,
     chip_select=board.LCD_CS,
diff --git a/examples/ov5640_stopmotion_kaluga1_3.py b/examples/ov5640_stopmotion_kaluga1_3.py
index 100f27d..77638f9 100644
--- a/examples/ov5640_stopmotion_kaluga1_3.py
+++ b/examples/ov5640_stopmotion_kaluga1_3.py
@@ -51,8 +51,10 @@
 import analogio
 import bitmaptools
 import board
+import busdisplay
 import busio
 import displayio
+import fourwire
 import gifio
 import sdcardio
 import storage
@@ -72,7 +74,7 @@ def record_pressed():
 
 displayio.release_displays()
 spi = busio.SPI(MOSI=board.LCD_MOSI, clock=board.LCD_CLK)
-display_bus = displayio.FourWire(
+display_bus = fourwire.FourWire(
     spi,
     command=board.LCD_D_C,
     chip_select=board.LCD_CS,
@@ -105,7 +107,7 @@ def record_pressed():
     b"\x29\x80\x78"  # Display on then delay 0x78 (120ms)
 )
 
-display = displayio.Display(display_bus, _INIT_SEQUENCE, width=320, height=240)
+display = busdisplay.BusDisplay(display_bus, _INIT_SEQUENCE, width=320, height=240)
 
 sd_spi = busio.SPI(clock=board.IO18, MOSI=board.IO14, MISO=board.IO17)
 sd_cs = board.IO12