ESP32-S3-Super-Mini-Test

PlatformIO template for a random "ESP32-S3 Super Mini" product based on the ESP32-S3FH4R2 I found. (4MB flash, 2MB PSRAM) Prints all system info and flashes the built-in WS2818.

Notes

• On some boards you may need to replug USB / upload while holding the boot button to get it into bootloader mode / upload successfully.
• Put your loop code in while (true) {} in the setup function and leave the loop function blank. Using the loop function crashes the chip.
• There is a regular LED and a WS2818 GRB LED on the board. Both are on GPIO 48, so use digitalWrite, etc. to use the regular LED and FastLED to use the WS2818 GRB LED.
• Change monitor_speed if desired. (default is baud rate of 115200)